Feeds

Field Built Stainless Wine Tanks

For more than thirty years, Westec has been building stainless wine tanks on-site in sizes that are too large or too heavy to be trucked, typically 60,000 to 250,000 gallons, and we can build smaller tanks on-site when needed. We will calculate the weight of the tank based on the gallonage you are considering, and will help develop the scope of work for permits.

The tank above is nearly 160,000 gallons and 30' x' 30' dimensionally with double-wall insulation. Westec built it with an A-frame structure, then placed it using a crane to lift it a short distance over existing tanks.

Safety is Number One

Experienced winemakers include liability planning with very large, site-built tank farms and they value Westec's engineering experience, properly trained crews, first-rate equipment and safety programs for field fabrications.

Working with the winemaker, Westec calculates the A-frame rating required based on the gallonage. The beams are sized for the specific planned load. Our engineered A-frames are "wet-stamped" and Westec provides this information as part of the permit process and for liability coverage. Safety is Number One with Westec.

We Can Build That Size

Give us a call with your gallonage and site requirements and find out more about our fast field fabrication. Westec's trained, experienced crews set up an A-frame and a construction trailer on a flat building site at your winery. The tank top is created first, then then next section is placed below it so that the new tank is open at the bottom until the final stage so it is not considered a confined space.

On-Site Tank Repairs

Westec repairs tanks by any manufacturer, in the field or in the winery. Give us a call to find out what we can do for you.

Field Build Tank Brochure

Stainless Steel Field Build Wine Tanks

About

Maverick Enterprises is an elite secondary closure provider for the wine, distilled spirits, and specialty foods industries.  We produce over 3 million capsules per day on our 24 production lines.  Maverick is a domestic supplier providing custom and stock closures to a majority of Napa Valley and Northern California as well as all across the United States. 


Our two facilities are located in Ukiah, CA in beautiful Mendocino County.  We are a fully vertically-integrated manufacturing facility which means we perform all functions in-house.  Maverick prints raw material with custom ink, slits the material and then forms the capsules all in their own facilities. 

However, what sets Maverick even more apart from anyone in the industry?  3 things: We take enormous pride in providing industry standards in customer care, technical services and high quality products you can't get anywhere else.


Call us today and find out how best we can help you with your capsule needs. 707-463-5591

                                                  

 

 


 

 

 

Contact

Contact List

Title Name Email Phone Extension
Sr. Customer Care Representative Debby De Lapo ddelapo@maverickcaps.com 707-234-6105
Customer Care Manager Myrinda Head mhead@maverickcaps.com 707-234-6108
Customer Care Representative Renee Caruso rcaruso@maverickcaps.com 707-234-6117
Customer Care Representative Robin Jamison rjamison@maverickcaps.com 707-234-610
VP of Quality Chet Koehn ckoehn@maverickcaps.com
Marketing Manager Guillaume Delecroix guillaume.delecroix@crealisgroup.com +33674995213

Location List

Locations Address State Country Zip Code
Fairfield Offices 2601 Maxwell Way, Fairfield CA United States of America 94534
Showroom 475 Aviation Blvd., Suite 130, Santa Rosa CA United States of America 95403
Maverick Enterprises, Inc. 751 East Gobbi Street, Ukiah CA United States of America 95482

List of Locations