6160 Egret Ct, Benicia, CA, United States of America, 94510
Selective Micro Technologies (SMT) products have recently been added to EPA list N, which is list of products which are approved for use against SARS-CoV-2, better known at Covid-19. At disinfectant strength (100 ppm), SMT’s ClO2 solutions can be used as a hospital grade disinfectant. Our products have undergone efficacy testing for review by the EPA, including testing against human Coronavirus, as well as other, more disinfectant resistant, pathogens.
SMT’s easy-to-use products are perfect for the winery; the products ship dry, take very little space, and require no dilution. Simply place a sachet, or “micro-reactor” into 2.5 gallons of water, allow generation time, and you have ready-to-use hospital grade disinfectant. SMT’s products have been OMRI registered for a variety of uses, as well as tested according to NSF’s standard 60 for human drinking water treatment!
Selectrocide® 1G
2 x 1G sachets in a 5-gallon tank/carboy of water will generate a 100ppm disinfectant strength solution for use against Covid-19.
Selectrocide® 12G
A 12G sachet in a 30-gallon drum of water, will generate a 100ppm disinfectant strength solution for use against Covid-19 that can be sealed and dispensed by pump.
Read More About Selectrocide Products Here
Why should I use Selectrocide verses Quat?
CLO2 Will Not Create TCA in Your Winery
What is the recommended method of disinfection? Spraying is the easiest application of Selectrocide. Allow for a 10-minute contact time on your surface. Then, simply let the area air dry. There is no need to wipe the surface after.
Note: Heavily Soiled Surfaces Must Be Pre-Cleaned Prior to Disinfection
Required PPE: gloves and goggles. Respirator/mask are not needed in large open areas, especially with ventilation. Use of Selectrocide is not recommended in unventilated small areas. If you are required to use Selectrocide in small areas, use the 3M cartridge found here: http://multimedia.3m.com/mws/media/40744O/3m-respirator-cartridge-and-filter-selection- poster.pdf?fn=CartridgeSelectionPoster_English Choose a 3M cartridge that is rated for acid gas, or chlorine dioxide.
For more information, please contact California Soda Company www.calsoda.com
Ron Hinck 415-246-7401 ronhinck.cs@gmail.com
Juan Carver 707-242-3000 juancarver.cs@gmail.com
Specialty Treatment Solutions (STS) is the premier provider of pre-engineered wastewater treatment systems. The company is comprised of industry experts and engineers with extensive experience in winery wastewater treatment.
Many years of experience in irrigation, wine production, and wastewater treatment have given our team a vast collective understanding of the complexities and specific requirements associated with winery and other special, high-strength wastewater applications (10,000 mg/L or more BOD). STS can provide solutions even for seasonal industries with an expected effluent quality of <10 mg/L BOD from our systems.
The technology deployed by STS was developed fifteen years ago. Currently, dozens of systems are in operation, ranging in size from 1,000 gpd to 300,000 gpd.
Specialty Treatment Solutions focuses on managing your winery wastewater streams and providing water reclamation and reuse solutions that comply with all federal, state, city, and local regulations.
Learn more: https://stswatertreatment.com/
Title | Name | Phone | Extension | |
---|---|---|---|---|
Business Manager | Ascension Aynat | ascension.aynat@stswatertreatment.com | +1 707 373 7490 |
Locations | Address | State | Country | Zip Code |
---|---|---|---|---|
Specialty Treatment Solutions | 6160 Egret Ct, Benicia | CA | United States of America | 94510 |