Feeds
RFMCO Represents Hexonic Heat Exchangers for the Wine Industry
RFMCO represents Hexonic heat exchangers in CA and Northern NV, including shell & tube, brazed plate and frame heat exchangers for commercial applications
Hexonic is a family-owned company in Poland founded in 1988, manufacturing heat exchangers and pressure vessels. As of 2024, Hexonic assembles all its heat exchangers in South Carolina, allowing for shorter lead times to California and Nevada. And all heat exchangers are assembled in accordance with ASME codes.
Model HAD Shell & Coil Heat Exchangers
Easy installation
Saving space
Low operating costs
High efficiency
Made according to PED and ASME codes
Applications
HVAC systems
Steam applications
Heating and cooling systems
Heat exchange in industrial processes
Oil coolers
Working Parameters
Max. temperature: 482 ° F
Min. temperature: -4°F
Max. pressure: 363 PSI
Model H Shell & Coil Heat Exchangers
Saving space - compact size and vertical installation reduce space needs for installation
High efficiency - higher heat exchange coefficient from corrugated tubes that increase flow turbulence and intensify heat exchange
Made according to PED codes
Applications
HVAC systems
Steam applications
Food industry
Brewing industry
Beverage manufacturing
Oil manufacturing
Clean-In-Place (CIP) stations
Chemical industry
District cooling
Cooling systems
Working Parameters
Tubes
Max. temperature: 392°F
Max. pressure: 232 PSI
Shell
Max. temperature: 392°F
Max. pressure : 232 PSI
Model RAD Shell & Coil Heat Exchangers
Optimized for modern A2L refrigerants like r32, r452b, r454b and propane r290
Highly resistant to corrosion – made of high-alloy austenitic stainless steel
Easy assembly and small footprint
High thermal efficiency with high-performance superheating used with well, river, lake water
Even refrigerant distribution with low maldistribution risk
Manufactured in accordance with ASME, PED codes
Proven technology with thousands of units operating in the field
Applications
Ground source heat pumps
Working Parameters
Shell side (water)
Max. Pressure: 232 PSI
Max. Temperature: 392 °F
Coil side (refrigerant)
Max. Pressure: 652 PSI
Max. Temperature: 266 °F
Model DNA Shell & Tube Heat Exchangers
Significantly higher heat transfer rates comparing to standard solutions
More efficient operation in high volume applications (e.g. flue gas, hot air, low pressure steam)
High mechanical resistance
The construction enables to obtain smaller, much lighter and material saving device
Features
Effective turbulent and vortex flow
Increases heat transfer coefficient up to double values
Effective heat transfer area
Homogeneous distribution of flow and velocity field
Flexible tube bundle
Low pressure drop
No dead spots
Baffle-free
No need of shell compensator
Elimination of vibration
Large heat transfer area in compact construction
Ideal for high volume media
Applications
Low pressure steam condensers
Industrial and chemical processes
Recuperation and regeneration in industrial technologies
Waste heat recovery - diesel and gas engines, cogeneration
Water and steam systems, cooling circuits
Working Parameters
Max. temp.: 397°F /203°C
Min. temp.: -4°F /-20°C
Max. pressure: Shell side: 145 PSI /10 bar & Tubes side: 232 PSI /16 bar
Model P-Line Shell & Coil Heat Exchangers
Designed to operate in pharmaceutical production, meets the highest hygienic standards
3-A certified
Manufactured in accordance with cGMP, PED, ASME codes
Double tube sheet protect pharmaceutical products before mixing it with the other medium
Surfaces have been polished to Ra ≤ 0.5 µm roughness for precise cleaning
Made entirely of stainless steel
One, two or four-pass design
Horizontal and vertical models available
Applications
WFI generator
WFI hot storage and distribution
WFI cold storage and distribution
WFI point of use
Clean steam generation
Food industry
Diary industry
Brewing industry
Working Parameters
Tubes
Max. temperature: Viton: 284°F & Silicon: 249°F*
Min. Temperature: Viton: 1.4°F* & Silicon: -°F
Max. pressure: Viton: 145PSI & Silicon: 145PSI
Shell:
Max. Temperature: 392°F
Min. Temperature: -13°F
Max. Pressure: 145 PSI
Model JAG Plate Heat Exchangers
High thermal performance
Technical solutions facilitating the exchanger installation and operation
Select proper installation operating parameters using accurate heat plate sizing
Heating plates made of stainless steel or titanium
Dismountable design
Applications
Chemical industry
Food & bev industry
HVAC-R
Iron & steel industry
Pulp & paper industry
Marine industry
Power
Pharmaceutical industry
Technical Updates
Additionally corrugated distribution area is designed to enhance turbulent flow in the entrance part of the plate. It also allows even flow through the plate which increases heat transfer by optimal use of its surface area. Specifically corrugated distribution area strengthens the plate and increases the stability of the whole construction. Carefully designed groove together with specially modelled gasket makes the exchanger withstand high pressure.
Triple Plate Positioning System Features
Gasket aligning system – special protruding
Elements align the plates in relation to one another
Point locking system – dedicated corrugated
Elements on the plate
Stellar suspending system – alignment in position to the upper and lower bar
The Finite Element Method Analysis (FEM) optimized the design of the JAG plate heat exchanger in terms of strength, mainly by improving the stress distribution on the cover plates and modifying the location of the fasteners, which contributed to the extension of the operating parameters.
Gaskets Patented Hybrid Lock System
Lock-in method
Lock-on method
Optimized unique shape of the gasket
Highest production standards
Model JAG Plate Heat Exchanger Design
Metal roller
Connection size: DN32 to DN250
Special profile of carrying bar
Front and rear plate available in various colors
Additional front feet
Sliding sleeve
Lock washer
Other frame elements made of galvanized or stainless steel
U-LEG
Model JAG Plate Heat Exchanger Working Parameters
Max. pressure: 150, 250, 300, 400 PSI
Max. temperature: 300˚F
Min. temperature: -4˚F
Model ST Tube-in-Tube Heat Exchangers
ST tube-in-tube heat exchangers find their application where fluids of high viscosity, density or high fiber or solid particle contamination are subjected to heat treatment, e.g. at wastewater treatment plants.
Applications
Dismountable design
Option to increase heat exchange surface
Stainless steel make
Broad range
Tube-in-Tube Features
The single section of the ST exchanger consists of two tubes with different nominal diameters.
The tube with smaller diameter (product side) is installed inside the tube with the larger diameter (shell side).
Hexonic heat exchangers offer efficient heat transfer utilizing fewer resources. Customers around the world have reduced costs, saved time and made a positive impact on the environment using Hexonic heat exchangers.
Contact us for Hexonic heat exchangers in California: https://www.rfmacdonald.com/contact/
About
About Vinoshipper
Vinoshipper is an end-to-end compliance, tax, and e-commerce platform that gives wineries, distilleries, and other alcohol producers the ability to sell directly to consumers while navigating the complexities of regulatory compliance and tax collection in real time. Every sale through the platform is guaranteed to be compliant.
By employing subject matter experts that work directly with regulators, the company is committed to helping producers comply with all laws, including age verification prior to purchases, state tax collection and reporting, and package tracking.
The company facilitates the expansion of direct sales across the United States for small and medium-sized producers and gives consumers more variety and brands to choose from. This helps create open and fair competition by removing barriers for independent businesses.
With more than 15 years of continual development and reinvestment in the platform, Vinoshipper is now the market leader in direct sales compliance and business software.
Headquartered in Windsor, California, Vinoshipper was launched in 2006 to help small producers. It is among the fastest-growing companies in the heart of wine country.
About our CEO & Founder
Steven Harrison is the President & CEO of Zero Link Markets, the company that operates Vinoshipper, an e-commerce and compliance platform for direct sales of alcohol products. The business facilitates small and medium-sized alcohol producers to sell and ship their products directly to consumers. He has more than 25 years working in finance and operations management and has been involved with several early-stage businesses, ranging from software companies to medical devices and consumer products.
As the co-founder of Zero Link Markets, Steven had the vision to create the Vinoshipper platform to help small businesses comply with the complex, multi-jurisdictional regulations and reporting requirements involved in selling wine, beer, and spirits.
Sixteen years after it started in 2006, the platform is at the forefront of the Direct-to-Consumer (DTC) movement, helping to transform and modernize the industry which dates to the Prohibition era. With more than 2,500 producer clients using the platform, Vinoshipper is one of the largest compliance businesses in the country.
When he is not helping his team with the rigorous job of compliant sales and shipping, Steven spends most weeks talking with public officials about the policy nuances related to DTC and advocating for new laws that support the safe and legal shipment of alcoholic beverages.
Contact
Contact List
| Title | Name | Phone | Extension | |
|---|---|---|---|---|
| No contacts found | ||||
Location List
| Locations | Address | State | Country | Zip Code |
|---|---|---|---|---|
| Vinoshipper | , Windsor | California | United States of America | 95492 |
List of Locations
Facebook feeds
Profile Picture
